Wednesday, February 06, 2008


Throttle and Mixture linkage.

I have had some difficulty setting up the throttle, because everything need to be adjusted exactly, in order to achieve the full travel of the carburetor lever. Ideally the middle hole in the lever arm here would be 1/16th further up, or VANS quadrant would give you a tiny bit more range. I have an idea to fix it so you can be sure the carb is controlling the range, not the quadrant, but for that you have to go to the other end of the cable.

The mixture was much simpler in that it requires only about 95% of the quadrant travel to give full range here.

I am a bit concerned about the tightness of the bend in the mixture cable, though it runs quite freely.

Comments: Post a Comment

<< Home

This page is powered by Blogger. Isn't yours?