Friday, July 13, 2007
Aerosport were kind enough to install a special fuel pump overflow fitting. Without it you might well have contact between the fitting and where the firewall sticks out. You might want to remember this when you order an engine if you are building a -4.
The engine as it came from Aerosport looks superb, though of course it will be a while before I know how it is in action.
One thing that is worth mentioning. I have the VS, HS and rudder plus tail wheel on the back end. It is now very light and can easily be lifted in one hand. When I next remove say the rudder I will have to be very careful it does not tip forward.